OEM Factory for 12v 30a Power Supply - AC/DC 12V 12.5A 150W Thin Switching Power supply LRS-150-12 – Huyssen
OEM Factory for 12v 30a Power Supply - AC/DC 12V 12.5A 150W Thin Switching Power supply LRS-150-12 – Huyssen Detail:
Features:
Huyssen Power Supply 12V12.5A
AC input 110/220VAC
Low leakage current <2mA
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by air
Withstand 300vac surge input for 5 second
Conformal coated
LED indicator for power on
Low cost, high reliability
100% full load burn-in test
2 years warranty
Specifications:
|
Model |
LRS-150-5 |
LRS-150-12 |
LRS-150-15 |
LRS-150-24 |
LRS-150-36 |
LRS-150-48 |
|
|
output |
DC voltage |
5V |
12V |
15V |
24V |
36V |
48V |
| Rated current |
20A |
12.5A |
10A |
6.5A |
4.3A |
3.3A |
|
| Current range |
0~20A |
0~12.5A |
0~10A |
0~6.5A |
0~4.3A |
0~3.3A |
|
| Rated power |
120W |
150W |
150W |
156W |
154.8W |
158.4W |
|
| Ripple&noise |
120mVp-p |
150mVp-p |
150mVp-p |
200mVp-p |
200mVp-p |
200mVp-p |
|
| DC voltage ADJ. range |
±10% |
±10% |
±10% |
±10% |
±10% |
±10% |
|
| Voltage tolerance Note.3 |
±3% |
±2% |
±1% |
±1% |
±1% |
±1% |
|
| Line regulation Note.4 |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
|
| Load regulation Note.5 |
±2% |
±1% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
|
| Setup,rise,hold up time | 800ms,30ms,40ms/230VAC(full load) | ||||||
| input | Voltage range | 90~132VAC/170~264VAC(selected by switch),240~373VDC | |||||
| Frequency range | 47~63HZ | ||||||
| AC current | 2.8A/115VAC 1.6A/230VAC | ||||||
| Inrush current | Cold start 50A/230VAC | ||||||
| Efficiency |
80% |
83% |
85% |
86% |
88% | 90% | |
| Leakage current | <0.75mA/240VAC | ||||||
| protection | overload | Rated output power110%~150% start over load protection | |||||
| protection type:hiccup mode,auto-recovery after fault condition is removed | |||||||
| Over voltage | Rated output voltage 115%~135% Start over voltage protection | ||||||
| Protection type:hiccup mode,auto-recovery after fault condition is removed | |||||||
| Over temperature | 100℃±10℃(RT1 detect beside transformer) | ||||||
| Protection type:cut off the output,auto-recovery after the temperature become normal | |||||||
| environment | Working temp,humidity | -30℃~+70℃(Please refer to“derating curve”) 20%~90%RH Non-condensing |
|||||
| Storage temp,humidity | -40℃~+85℃,10%~95%RH non-condensing | ||||||
| Withstand vibration | 10~500HZ,2G 10min/1cycle,period for 60 minutes,each axes | ||||||
| safety | Withstand voltage | I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC | |||||
| Isolation resistance | I/P-O/P,I/P-FG,O/P-FG:100M ohms/500VDC | ||||||
| Fit standard | Safety standards | Compliance to UL60950-1,TUV EN60950-1,GB4943 | |||||
| EMC emission | Compliance to EN55022(CISPR22)Class A,GB9254 Class B,EN55014,EN61000-3-2,3 | ||||||
| EMC immunity | Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024,EN61000-6-1 | ||||||
| others | Dimension | 159*97*30mm(L*W*H) | |||||
| Weight/packing | 0.43kg/30pcs/13.9kg/0.023m³/0.82CUFT | ||||||
| MTBF | ≥580K hrs min. MIL-HDBK-217F(25℃) | ||||||
| note | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.3. Tolerance : includes set up tolerance, line regulation and load regulation.
4.Line regulation is measured from low line to high line at rated load. 5.Load regulation is measured from 0% to 100% rated load 6.The ambient temperature derating of 5℃/1000 m is needed for operating altitude greater than 2000m(6500ft) 7.The power supply is considered as a component which will be installed into a finalequipment.The final equipment must be re-confirmed that it still meets EMC directives.For guidance on how to perform these EMC tests. |
||||||
Related products:
Applications:
Widely used in : Billboards, LED Lighting ,Display screen, 3D Printer, CCTV camera, Laptop, Audio ,Telecommunication ,STB , Intelligent robot, Industrial control, equipment, etc.
Production Process
Applications for power supply
Packing & Delivery
Certifications
Product detail pictures:
Related Product Guide:
Our concentrate on should be to consolidate and enhance the quality and service of present products, meanwhile consistently produce new products to meet unique customers' demands for OEM Factory for 12v 30a Power Supply - AC/DC 12V 12.5A 150W Thin Switching Power supply LRS-150-12 – Huyssen , The product will supply to all over the world, such as: Cyprus, New Orleans, Ghana, There are advanced producing & processing equipment and skilled workers to ensure the merchandise with high quality. We've got found an excellent before-sale, sale, after-sale service to ensure the customers that could rest assured to make orders. Until now our merchandise are now moving on fast and very popular in South America, East Asia, the Middle east, Africa, etc.
By Lee from Estonia - 2017.09.28 18:29
The supplier cooperation attitude is very good, encountered various problems, always willing to cooperate with us, to us as the real God.
By Louis from Bulgaria - 2018.11.28 16:25
